Highway Guard Rail/Crash Barrier

We are offering the wide range of this

Highway Guard Rail/Crash Barrier

We are offering our clients with robustly constructed guard rails that are ideal for using as traffic safety systems in highways. Countering the problem of high percentage of heavy vehicles on highways, these guard rails are installed to reduce the severity of run-off-road accidents. These guard rails are functional by redirecting a vehicle away from embankment slopes or fixed objects and dissipating the energy of the errant vehicle. Widely used on all types of roads, particularly embankment, close to cliffs, bridges and canals. These guard rails prevent the vehicles from leaving the road or from crossing on to the other carriageway. Providing elasticity & deferability for absorbing and dissipating the energy induced by impact with the vehicle, the metallic structure of guardrails act as median barriers on roads.

The components of guard rail system are mentioned below :

W Beam
Cold roll formed section
3mm /2.7mm thick HR sheet.
Fe 410/360 grade steel conforming to IS 5986 or IS 10748 or equivalent
Hot dip galvanised - 550 gms/m² or 460 gms/m² conforming to MORT&H (Ministry of Road Transport & Highways) AASHTO M180 and IS
Yield Strength: 240-310 N/mm²
Tensile Strength: 410-490 N/mm²
Elongation: 15-25%
Post
Anchored to foundation on Ground & Bridges
Channel section of 75x150x75x5mm
5mm thick HR sheet
Fe 410/360 grade steel conforming to IS 5986 or IS 10748 or IS 2062 or equivalent
Hot dip galvanised -550 gms/m² or 610 gms/m² conforming to MORT&H (Ministry of Road Transport & Highways) AASHTO M180 and IS
Spacer
Buffer between Post & W-Beam
Channel section of 150x75x5mm.
5mm thick HR sheet
Fe 410/360 grade steel conforming to IS 5986 or IS 10748 or IS 2062 or equivalent
Hot dip galvanised -550 gms/m² or 610 gms/m² conforming to MORT&H (Ministry of Road Transport & Highways) AASHTO M180 and IS
End Section
Anglised, Fish Tail or Tubular end terminals
Fasteners
Hot dip galvanised or electro galvanised bolts, nuts and washers conforming to IS 1367 of grade 4.6 MS
16mm dia Button head bolts for W-beam to W-beam & W-beam to spacer connection
16mm dia hexagonal head type bolts for spacer to post connection

Our guardrails find extensive application in the following areas:

National highways, expressways, bridges and flyovers
Motor racing / test drive tracks
Crash test sites
Factory areas
Traffic safety in airports
Plants handling hazardous chemicals

Mines and collieries where continuous movement of vehicles is envisaged

Send Enquiry

Ms. Prakhar Gupta / Mr. Er. Y. K. Gupta (Director)
L 1, L-2, Industrial Area, Site-1, Sultanpur Road
Rae Bareli, Uttar Pradesh - 229 001, India
Telephone: +(91)-(535)-2702474

Contact via E-mail

Contact via Mobile

Contact via SMS